Formatting the hard disk, Formatting the hard disk -20 – Konica Minolta bizhub 282 User Manual
Page 127
5
Control Panel Settings
5-20
362/282/222
Control Panel Settings
Chap
te
r 5
Formatting the hard disk
The hard disk can be formatted.
0 When the hard disk is formatted, all saved data is deleted. Therefore, be
sure to print any necessary data in advance.
0 Before formatting the hard disk, check that no jobs are being performed,
such as documents saved on the hard disk being printed. Formatting
cannot begin if a job is not finished.
0 Do not touch the machine while formatting in order to prevent errors from
occurring.
0 Wait at least two minutes after turning on the machine before formatting.
1
Press the [Utility/Counter] key.
2
Touch [Admin. Management].
3
Type in the administrator code, and then touch [Enter].
4
Touch [Admin. 2], and then touch [HDD Management].
5
Touch [Format].
Utility/Counter
Administrator Management 2
Printer
Setting
Software SW
Network
Settings
Ping
Enter
Security
Setting
Delete Job
HDD
Management
Utility/Counter
HDD Management
HDD Lock
Setting
Overwrite
All Data
Format
Enter
If younhave changed the HDD setting,
please turn main switch OFF and ON.
Encryption
Setting
362.book 20 ページ 2008年10月20日 月曜日 午前11時32分