Konica Minolta bizhub 282 User Manual
User’s guide [box operations
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Introduction
- 1 Overview of the Box functions
- 2 Saving documents
- 2.1 General information
- 2.2 Saving while copying
- 2.3 Scanning and saving the data (Scan to HDD)
- Available functions/parameters
- Saving data by touching a one-touch dial button
- To save scan data using a one-touch button
- Specifying the scanning quality
- To specify the scanning quality
- Specifying the scanning density
- To specify the scanning density
- Specifying the document scanning size
- Printing the result report
- To print the transmission report
- Specifying the 2in1 setting
- Specifying the 2-Sided TX setting
- Specifying the Priority TX setting
- Specifying the Timer TX Setting
- Specifying the Stamp setting
- Specifying the file name
- Specifying the e-mail notification recipient
- Viewing the transmission report
- 2.4 Downloading saved documents to the computer
- 2.5 Saving print data
- 3 Printing documents
- 4 Routing documents
- 5 Control Panel Settings
- 5.1 Available functions
- 5.2 Registering one-touch recipients from the control panel
- 5.3 Deleting confidential documents
- 5.4 Managing data saved on the hard disk
- 5.5 Specifying software switch settings (machine functions)
- Software SW settings
- To change a software switch setting
- Specifying settings for address input and broadcast transmissions (mode 018)
- Specifying settings for the image in the failed transmission report (mode 023)
- Specifying the length of time that confidential documents are saved (mode 036)
- Verifying the integrity of files saved on the hard disk during startup (mode 430)
- Specifying whether to enable access locks, the method for deleting image data, the selection method for confidential documents, and whether to enable the password rules (mode 469)
- Specifying whether or not the use of TCPSocket is prohibited (mode 477)
- Specifying the deleting method for [Del.] in input screens (mode 478)
- Specifying settings for limiting user authentication to only Scan functions (mode 479)
- 6 Specifying settings using PageScope Web Connection
- 6.1 Using PageScope Web Connection
- Performing operations from PageScope Web Connection
- System requirements
- Accessing PageScope Web Connection
- When performing user authentication
- If account track settings have been applied
- Structure of pages
- Logging on to Administrator mode
- Web browser cache
- With Internet Explorer
- With Netscape
- Searching for a user box by its box number
- Searching for a user box from the indexes
- 6.2 Registering one-touch recipients
- 6.3 Performing Box operations from User mode
- 6.4 Performing Box operations from Administrator mode
- 6.1 Using PageScope Web Connection
- 7 Appendix