Setting the address manually, Setting the address manually -5, Caution – Konica Minolta magicolor 3730DN User Manual
Page 122
Network Connection
4-5
Setting the Address Manually
You may also manually change the printer’s IP address, subnet mask, and
gateway by using the following instructions. (See Chapter 3 “Understanding
the Ethernet Configuration Menus” for more information.)
"
When manually setting the IP address, turn off DHCP, BOOTP and
ARP/PING first. In addition, when the IP address is changed, add a
new port or reinstall the printer driver.
CAUTION
You should always notify your network’s administrator before changing
the printer’s IP address.
1
Turn on your PC and printer.
2
When the printer’s message window displays
READY
, set the IP address.
Press this
key . . .
(until) the message window reads . . .
READY
MENU
SPECIAL PAGES
MENU
NETWORK
IP ADDRESS
XXX.XXX.XXX.XXX
IP ADDRESS SET
AUTO
IP ADDRESS SET
SPECIFY