Konica Minolta bizhub 20 - Manual (Page 22)

22
Windows
® Wired Network
g
Choose Network Connection, and then click
Next.
h
For Windows ® XP SP2/XP Professional x64
Edition/Windows Vista ® /Windows ® 7 users,
when this screen appears, choose Change the
Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
If you are not using the Windows ® Firewall, see
the User’s Guide for your software for
information on how to add the following
network ports.
„ For network scanning, add UDP port 54925.
„ For network PC-Fax receiving, add UDP port
54926.
„ If you still have trouble with your network
connection, add UDP port 137.
i
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
j
If you do not want to monitor the machine
status and error notifications from your
computer, uncheck Enable Status Monitor
and then click Next.
k
The installation of the KONICA MINOLTA
drivers will automatically start. The installation
screens appear one after another.
Note
If you want to install the PS driver (BR-Script
Driver), choose Custom Install and then follow
the on-screen instructions. When the
Select Features screen appears, check
PS Printer Driver, and then continue following
the on-screen instructions.
Note
• You can find your machine’s IP address and
the node name by printing out the Network
Configuration List. See Print the Network
Configuration List on page 28.
• If your machine is not found over the network,
following screen will appear.
Confirm your network setting by following the
on-screen instructions.
• If the machine is not yet configured for use on
your network, the following screen appears.
Click OK and then Configure IP Address.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.