Konica Minolta bizhub C650 User Manual
Page 231
C650
4-51
Network Settings
4
7
Specify the desired settings.
–
[Check Connection] appears only if "Enabling LDAP" (displayed from the LDAP Setting screen) is
set to "ON" and "Manual Destination Input" (displayed on the Security Details screen) is set to
"Allow".
8
Touch [Fwd.
→].
Setup LDAP screen 3/6 appears.
9
Specify the desired settings.
10
Touch [Fwd.
→].
Setup LDAP screen 4/6 appears.
11
Specify the desired settings.
–
Select the authentication method that is used by the LDAP server being used. For details, refer to
the manual for the LDAP server being used.
–
If "GSS-SPNEGO" is selected as the authentication method, type in the domain name of Active
Directory.
–
Depending on the selected authentication method, a connection check cannot be performed if the
following settings are incorrectly specified in Setup LDAP screen 6/6.
–
For "Simple" and "Digest-MD5": Login Name