How do i remove a media jam inside the duplex unit, 5 reinstall the duplexer – Konica Minolta PAGEPRO 9100 User Manual
Page 83
Advertising
Clearing Internal Jams
77
How do I remove a media jam inside the duplex unit?
1
Open the upper cover
of the
duplex unit, remove the jammed
media , and then close the upper
cover .
2
Open the lower cover
of the
duplex unit, remove the jammed
media , and then close the lower
cover .
3
If the media jam error is not
cancelled after removing the misfed
media according to the previous
procedure, remove the duplexer from
the printer. (Refer to the duplexer
installation instructions in chapter 6,
“Installing Accessories.”)
4
Remove any media in the feed slot at
the bottom of the back of the printer.
5
Reinstall the duplexer.
6
If necessary, open and close the top
cover to cancel the error
message.
1
2
3
1
2
3
1
3
2
Advertising