B tighten the screws, 9 reconnect all interface cables – Konica Minolta PAGEPRO 9100 User Manual
Page 129
Optional Media Feeder(s)
123
7
Using the mounting parts (four
screws and two brackets), secure
the printer to the media feeder.
a
Using the enclosed screws,
attach the enclosed brackets to
the two locations on the back of
the printer.
b
Tighten the screws.
8
Remove the media tray from the
upper unit (printer or other media
feeder), and then secure the two
units at the two locations shown
using the enclosed screws. (Use a
coin to tighten the screws.) After
tightening the screws, replace the
media tray.
When installing multiple media feed-
ers, secure each using the same pro-
cedure.
9
Reconnect all interface cables.
10
Reconnect the power cord, and turn
on the printer.
In compliance with UL guide-
lines, “The appliance inlet is
considered to be the main
disconnect device.”