Konica Minolta PAGEPRO 9100 - Manual (Page 77)

Clearing Media Input Jams 71
4
If the misfed media cannot easily
be pulled out, lift the green lever
on the inner-right side to release
the media feed roller, and then pull
out the media . After removing
the misfed media, be sure to return
the green lever to its original
position .
Do not use force to remove
jammed media.
5
If you have optional media tray(s),
repeat steps 1–4 for each optional
media tray installed.
At times, the media may be stopped inside the optional media
tray(s) (in back, along the media path). Check inside the trays from
the front of the printer, and remove any misfed media.
6
Install the media tray(s), inserting it
(them) as far as possible into the
printer.
Check that the media
remaining in the media
tray(s) is loaded correctly
before installing the tray(s).
Make sure no media
remains misfed under the
roller in the tray.
1
3
2