Konica Minolta Bizhub 215 - Manual (Page 93)

Printing on envelopes 4
4-16 bizhub 215
4.6
Us
in
g as
a
Pr
in
ter
Ch
apt
er
4
4.6 Printing on envelopes
To print on envelopes, you need to specify the size and type of paper in Control Panel and select the enve-
lope size in the data to be printed or in the printer driver.
When using the Bypass Tray
1
Load envelopes.
% Load the envelopes with the flap side facing up.
% Up to 10 envelopes can be loaded.
% When the paper is loaded, a screen for specifying the paper in the Bypass Tray appears on the
Control Panel. Go to Step 2 to configure the settings for the envelopes.
2
Configure the settings for the envelopes.
% Use +, to select [SIZE], then press ). (1)
% Use +, to select the correct setting, then press OK. (2)
% Use the Keypad to enter the paper size, then press OK. (3)(4)
% Use +, to select [TYPE], then select ). (5)
% Select [ENVELOPE]. (6)
% Press Back to return to the basic screen.
% If you are not sure about the size of the envelopes, measure the length (X) and width (Y) using the
Original Scale.