Konica Minolta magicolor 7450 grafx - Manual (Page 14)

For a Local Connection 10
3
The result of the firmware transfer is displayed. Click the [Exit] button.
"
If the firmware was successfully updated, the printer will automatically
restart.
Do not turn off the printer while its firmware is being updated.
4
Print the configuration page from the printer’s control panel to check the
settings.
"
When the firmware is updated, the printer control panel settings may
return to their defaults. Refer to the configuration page that was previ-
ously printed to reset the settings from the printer’s control panel.
"
For details on printing the configuration page and using the printer’s
control panel, refer to the printer’s User’s Guide.
mcPS_Firmware.book 10 ページ ２００７年１０月９日 火曜日 午後２時７分