Konica Minolta bizhub 42 - Manual (Page 65)

bizhub 42/36 3-11
3.1 User Authentication Function 3
<From PageScope Web Connection>
0 Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
0 If any User Name not registered with this machine is authenticated through User Authentication when
[External Server] (Active Directory) is set for Authentication Method, the User Name is automatically reg-
istered with this machine.
1
Start the Web browser.
2
Enter the IP address of the machine in the address bar.
3
Press the [Enter] key to start PageScope Web Connection.
4
Click the Registered User radio button and enter the User Name and User Password.
5
Click [Log in].
% If a wrong User Password is entered, a message that tells that the authentication has failed appears.
Enter the correct User Password.
% A failure in authentication as a result of the entry of a wrong password is counted as unauthorized
access. If the cumulative number of unauthorized accesses reaches three during operation of the
machine, the machine is set into an access lock state and prohibits any subsequent password entry
operations. To cancel the access lock state, turn off, then on, the power switch of the machine.
When the power switch is turned off, then on again, wait at least 10 seconds to turn it on after turn-
ing it off. This interval is necessary to ensure that the machine functions properly.
6
Click [Log out] to log off from the user operation mode.