Konica Minolta bizhub 25 - Manual (Page 97)

2-44 Specifying the Network Settings
Function Description Settings Reference page
TCP/IP Settings You can set the settings for using
the machine on a network.
l Host Name
l Workgroup
l DNS Server Addresses
l
DNS Suffix
l Obtain IP address (DHCP)
l IP Address
l Subnet Mask
l
Default Gateway
l WINS Server Address
l IPv6 Setting
The MAC address is
entered
WORKGROUP
Not registered
Not registered
ON
OFF
192.168.1.10
255.255.255.0
Not registered
Not registered
2-45
Refer to Chapter
3, “Setting the
Connection
Environment” in
the Message Board
Guide.
Archive
Settings When the machine transmits
and receives documents via
fax or e-mail, you can transmit
those documents to a specified
destination via fax, or store them in
a specified shared folder. Not registered 2-68
e-mail Gateway You can transmit documents to an
e-mail gateway (fax server).
l Setting
You can specify the default setting.
l Prefix
Enter the prefix for the local part of
the e-mail address.
Up to 32 characters can be entered.
l
Suffix
Enter the suffix for the local part of
the e-mail address.
Up to 48 characters can be entered.
ON
OFF
Not registered
Not registered
2-72
Authentication
Method Set the authentication method for
users that log in. Stand-Alone
Single Sign On
Network 2-34
Automatic
LogoutTime You can set the time it takes before
the machine automatically logs out
a logged in user if no operations
have been performed on the
machine. 1 - 10min
3min 2-75
Delete
Restriction
Settings You can initialize the access
restrictions set in Message Board
from the machine.
Use this function when you cannot
access Message Board.