Ipds printer parameters, Configuration parameters – Konica Minolta bizhub PRESS 2250P User Manual
Page 101
Advertising
1. Create a Print Services Facility (PSF) TCP/IP printer.
This printer will be used as the IC-312m print controller IPDS
printer.
2. Set the following options for the PSF TCP/IP printer:
a. Enter the IC-312m print controller IP address.
b. Enter 5001 for the TCP/IP IPDS port of the IC-312m print
controller.
IPDS printer parameters
Note: The IPDS workflow is available only with the Trans Pack.
You can create new IPDS printers based on the two default
printers for customizing your workflow. For each IPDS printer you
can set the following parameters:
●
Configuration
●
●
Quality
●
Monochrome
See also:
on page
Configuration parameters
Note: The IPDS workflow is available only with the Trans Pack.
IPDS printer parameters
93
Advertising