Konica Minolta BIZHUB C360 - Manual (Page 17)

for Customer Engineer
Issued by BT-CSO Ver 1.01 17
1. Gather information from MFP/ Kit
1-1. Find [Token Number] from License Kit.
1-2. Get [Request Code] and [Serial Number] from MFP.
Acquisition procedure: MFP panel <Administrator Mode>
•MFP panel <Service Mode> •PSWC
2. Access to LMS
3. MFP Activation
• Get [Request Code] and [Serial Number] from MFP <Service Mode>.
a) Enter in Service Mode, and then press
“Stop”,”9”. The “Billing Setting” screen will
appear.
Select [License Management].
b) Select [Request Code].
c) Print displayed [Request Code] and [Serial
Number], or write them down.
Press Start button to print the information.
*Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”. “0 (Number)” is
not used in [Request Code].
d) Exit from Service Mode and go on to the
next step [2. Access to LMS].