Konica Minolta KIP 7700 - Manual (Page 3)

KIP CGM
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2012 KIP.
- 2 -
Installation
The components needed to allow the KIP to print CGM files are already installed in the latest KIP Software (newer KIP
Update may be necessary). All that is necessary to do is to put the valid CGM license file into the correct location in the
KIP IPS.
1. Browse to the location of the license and paste in the
License.dat file that will be used to activate. The license
location will be here:
C:\CGM\ZEHPLOT\PRG\ZEHD\LICENSE
Paste the License.dat file in to the License folder.