Konica Minolta KIP 7700 - Manual (Page 4)

KIP CGM
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2012 KIP.
- 3 -
Using KIP Print
Please Note: This works from KIP Print as well.
1. Open the KIP Print application and Browse to the location of stored CGM files
Note: The CGM columns can be turned on in the KIP PRINT software by going to Options and then
Modify Columns. Check the boxes next to “CGM Width” and “CGM Length” and select “OK”.
2. The Following columns will appear and allow for the printing of CGM files. The Selection of
Auto is default for both columns however specific sizes may also be set through the dropdown
arrows. Please note the CGM format is not viewable in the KIP Print viewer but will still print
when sent to the KIP Printer.
3. Select File to be printed and select Submit to send the file