Pi back cover, Perfect binding settings – Konica Minolta bizhub PRO 1051 User Manual
Page 267
PostScript PPD Printer Driver setting (Mac OS X)
10
bizhub PRO 1200/1200P/1051 Printer
10-16
PI Back Cover
Sets a back cover for which paper is from the PI Tray 1, PI Tray 2 or PI-PFU
Tray 1 - 3.
The [PI Front Cover] or [PI Back Cover] cannot be set in the following cases:
-
When the [None] is selected for [Large PI] in the [Printer Info] window.
Perfect Binding Settings
The perfect binding function is a function with which the originals (the body
of documents) the spine of which is pasted by the Perfect Binder (PB-502/
503) is rolled-up in the cover sheet for binding.
Perfect Binding cannot be set in the following cases:
-
When [PB-502/503] is not selected in [Device Settings] tab.
-
The body of documents are not to be folded and cut out.
-
The illustration above shows the example of [Left Bind]. For [Right Bind],
see p. 10-26.
-
[Left Bind] is specified as a default.
Front Cover (Inside)
Pasting of the body of
documents to the spine.
Spine
Front Cover (Outside)
Back Cover (Outside)
Back Cover (Inside)
Body of Documents
Last page but one
1st page of the body
of documents