Document Outline

• SAFETY INFORMATION
  • Warning and Precaution Symbols
  • Meaning of Symbols
  • Precautions for Routine
• Welcome
• Contents
• 1 Notes to Operators and Key Operators
  • 1.1 The following safety rules should be observed
    • FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)
    • WARNING
    • Interference-Causing Equipment Standard (ICES-003 ISSUE 4) (For Canada Users)
    • CE Marking (Declaration of Conformity) (For European Users)
    • Acoustic Noise
  • 1.2 Safety Information (MSP 3500 Printer)
    • Laser Safety
    • Internal Laser Radiation
    • For United States
    • CDRH Regulations
    • All other users
    • For Denmark
    • For Finland, Sweden
    • For Norway
    • WARNING LABEL
    • OZONE RELEASE (For all Users)
    • WARNING LABEL
  • 1.3 Safety Information (MSP 3000 Printer)
    • Laser Safety
    • Internal Laser Radiation
    • For United States
    • Laser Safety
    • CDRH Regulations
    • All other users
    • For Denmark
    • For Finland, Sweden
    • For Norway
    • WARNING LABEL
    • OZONE RELEASE (For all Users)
    • WARNING LABEL
• 2 Precautions
  • 2.1 Installation Precautions
    • Installation Site
    • Power Source
    • Grounding
    • Space Requirements
    • Operating Environment
    • Using the Printer
    • Care of Printer Supplies
• 3 Scanner
  • 3.1 System Overview
  • 3.2 System Configuration
    • PR Mode (connected to a printer)
    • PC Mode (connected to a personal computer)
  • 3.3 Parts of the Scanner
  • 3.4 Control Panel Keys and Indicators
    • Control Panel 1 (Basic)
    • Control Panel 1 (Shift Function)
    • Control Panel 2
    • When Malfunctions/Call-Tech.-Rep. Indicator Lights up
  • 3.5 Image Processing Functions
  • 3.6 Turning the Power On and Off
    • Turning ON
    • Turning OFF
  • 3.7 Auto Power Save Mode
  • 3.8 Printing or Scanning Procedure
  • 3.9 Selecting a Projection Lens
  • 3.10 Replacing the Projection Lens
  • 3.11 Positioning the Film Image
  • 3.12 Zooming, Focusing, and Image Rotation
    • Zooming
    • Focusing
    • Image Rotation
  • 3.13 Selecting the Film Type
    • Auto
    • Nega (negative film)
    • Posi (positive film)
  • 3.14 Selecting the Paper Size
    • Selecting the Paper Size
    • Using the Auto Paper Selection Function
    • Using the Auto Film Format Selection Function
  • 3.15 Selecting the Print Position
    • Center
    • Left
    • Page-by-Page
  • 3.16 Selecting the Image Density
    • Using Auto Exposure
    • Using Manual Exposure
  • 3.17 Entering the Number of Prints to be Made
    • 1 to 9
    • 10 to 99
    • Correcting a Number
  • 3.18 Using Auto Masking
    • Selecting Auto Masking
    • Operating Conditions for Auto Masking
  • 3.19 Manual Masking Panels (Option)
  • 3.20 Using Manual Masking
    • Selecting Trimming
    • Defining an Area
    • Defining Two Separate Areas
    • Defining Page-by-Page Print Area
    • Clearing a Defined Print Area
    • Selecting Masking
  • 3.21 Using Centering and Fit
    • Centering
    • Fit
  • 3.22 Using the Cycle Print Mode
    • Specifying the interval between scanning operations
    • Operating in the Cycle Print Mode
  • 3.23 Selecting the Connection Mode
  • 3.24 Selecting the Resolution
  • 3.25 Registering the Job Program
  • 3.26 Calling the Job Program
  • 3.27 Using the Electrical Zoom
    • Zoom +
    • Zoom -
    • Skip of magnification
    • Clearing the Zoom magnification
  • 3.28 Adjusting the Illumination of the Screen
  • 3.29 Replacing the Projection Lamp
• 4 MSP 3500 Printer
  • 4.1 Parts of the Printer
  • 4.2 Paper Specifications
    • Use only the following types of paper:
  • 4.3 Set the Paper
    • Loading Paper into the Paper Feeding Tray
    • Loading Paper in the Paper Cassette
  • 4.4 Replacing the Toner Cartridge
  • 4.5 Replacing the Exhaust Filter
  • 4.6 When the Paper Misfeed Indicator Lights Up
    • If the Misfeed Indicator lights up along with a P0 code:
    • If the Misfeed Indicator lights up along with a P1, P2 or P3 code:
    • Clearing a Misfeed from the Paper Feeding Tray
    • Clearing a Misfeed from the Paper Cassette
    • Clearing a Misfeed from inside the Printer
    • Clearing a Misfeed from output bin
• 5 MSP 3000 Printer
  • 5.1 Parts of the Printer
  • 5.2 Paper Specifications
    • Use only the following types of paper:
  • 5.3 Set the Paper
    • Loading Paper into the Paper Feeding Tray
    • Loading Paper in the Paper Cassette
  • 5.4 Replacing the Toner Cartridge
  • 5.5 When the Paper Misfeed Indicator Lights Up
    • If the Misfeed Indicator lights up along with a P0 code:
    • If the Misfeed Indicator lights up along with a P1, P2 or P3 code:
    • Clearing a Misfeed from the Paper Feeding Tray
    • Clearing a Misfeed from the Paper Cassette
    • Clearing a Misfeed from inside the Printer
• 6 Troubleshooting
  • 6.1 Solving Irregular Printing Problems
• 7 Maintenance
  • 7.1 System Care
    • Cleaning the Scanner Screen
    • Outer Covers
    • Carrier Glass (Option)
    • Cleaning the System Printer (Option)
    • Cleaning the MSP 3500 Printer
    • Cleaning the Printer Exterior
    • Cleaning the Printer Interior
    • Paper Pickup Rollers
    • Cleaning the MSP 3000 Printer
• 8 Miscellaneous
  • 8.1 Specifications
    • PC Mode
    • PR Mode: MSP 3500 Printer
    • PR Mode : MSP 3000 Printer
  • 8.2 Initial Settings
    • User Settings on the Control Panel
    • User Mode
    • Entering and Leaving the User Mode
    • Settings in Each User Mode Function
    • System Settings by the dealer
  • 8.3 For Key Operator’s Use