Konica Minolta 7013 - Manual (Page 12)

If you see this message on the LCD,
start the job again from the beginning.
Open&Close ScanCover
Reset Document
Clearing original document jams
12
Just in case
In this step, if more than 60 seconds passes without
pressing any keys, the machine will erase from memory
all pages stored during this operation and the machine
will return to the standby mode.
The check message “Repeat transmission.”
will be printed out if the document jammed
during transmission.
In this step, if more than 60 seconds passes without
pressing any keys, the machine will begin to send or
copy the document(s) stored during this operation.
Reset the document from
the jammed page and
press
START
.
2
This message will appear when the document
jammed in the following cases:
• The first page of the document jammed.
• During the real time transmission or quick
memory transmission.
If you see this message on the LCD
and wish to continue scanning from
the jammed page, press
ENTER
.
To abort the operation, press CANCEL .
Document Jam
Contstor Enter/Cancl
1