Konica Minolta KIP 7000 - Manual (Page 182)

Section 6 Request 6-26
2.5.4.6
Stamp Placement And Margin Area
This allows placement of the stamp in 9 preset locations. Then margins can be
applied to move the image up to 5” from the selected border.
2.5.4.7
Text Rotation – Pull down
Allows the user to rotate (counter clockwise)
the text portion of their stamp in 45° increments.
User may also click on the “KIP” in the Stamp
Placement area to cycle through the Text
Rotation options.
2.5.4.8
Text / Graphic Gap – Text Field
This applies a separation of up to 5” between
the Text and Graphic stamps.
2.5.4.9
Graphic Rotation – Pull down
Allows the user to rotate (counter clockwise)
the graphic portion of their stamp in 45°
increments. User may also click on the “Logo”
in the Stamp Placement area to cycle through
the Graphic Rotation options.
2.5.4.10 Graphic Placement – Pull down
Determines the placement of the graphic in
relation to the applied text. This is ignored if
text is not applied.