Avenview HDMI-VS-4X1 - Manual (Page 6)

www.avenview.com 6
General Troubleshooting
Problem Possible Solution
Remote Control not working

Check to ensure that batteries are full

Operate the device without any obstruction between
HDMI-VS-4X1 Switch and the Remote Control.
Bright Dots in the Picture

Adjust the picture quality via built-in equalizer. Hold down
the manual switch button for 2 seconds until yellow LED
blinks.

Repeat the procedure until problem is solved

Check your cable
No Image

Ensure that the monitor cable is securely fastened to the
HDMI and Monitor port.

User higher quality HDMI cable (24 gauge HDMI cable)