Konica Minolta bizhub C650 - Manual (Page 4)

Issued by BT-CSO Ver 1.03 4
About this guidebook
From Mosel/ Thames i-Option firmware, the license activation system is newly adopted. Some
additional functions will be available after the license activation. This guidebook explains
outline and operation procedure of License Management.
¾ i-Option firmware is also including some additional functions that can be used without
the authentication. For the explanation of those functions. Please refer to the PRI for
the firmware.
Outlines of Functions
¾ New “License Activation Base Functions” are included in Mosel/ Thames i-Option
firmware. Activation Base Functions have several types of functions. (Please refer to
the functions listed below.) Those functions are included in the firmware. If you
purchase the license and activate the License Activation Base Functions, the functions
will be available. Also, the function enhancements do not necessary Activation are
included in the firmware. About those functions, please refer to not this guidebook but
PRI distributed with the firmware or the following chapter.
¾ License Activation Base Functions
In this guidebook, the functions like “LK-101, LK-102, LK-103” (You need to purchase
the license when using these functions.) are called “License Activation Base
Functions”.
— LK-101
Web browser function, Image panel, and it is possible to register the picture
(thumbnail) in the address book on the image panel.
— LK-102
Enhancement of PDF encryption (response to public key and AES, function that
can write title/ creator when sending PDF file, etc.)
— LK-103 LK-103 Includes “LK-101” and “LK-102”.
License Operations
When you start, stop or repair using the license activation base functions, those operations,
Activation, Deactivation, Repair or Initialization, have to be made as you intended. There
are 4 types of License Operations.
— License Operations
z Activation
This is the operation to enable License Activation Base Functions and make
the functions operational.