Konica Minolta Konica Minolta 240f - Manual (Page 63)

Konica Minolta 240f 3-5
3.1 Making copies 3
4
Select [Long Edge] or [Short Edge], and press [Enter].
% Refer to the description on the next page to select the
binding position. When copying a two-sided document,
select the binding position of the document. When copying
a one-sided document, select the binding position of the
copy.
5
Press <Start>.
% When the front side scan is over, the machine shows the
following screen:
% If you selected [1 ) 2sided] in step 3, the procedure is
complete.
6
Set the backside of the duplex document, and press <Start>.
d
Refer to the following table when selecting the binding position.
Binding position Image
Long Edge
Short Edge