Konica Minolta magicolor 1650EN - Manual (Page 161)

Solving Other Problems 8-24
Media is
wrinkled. The media is moist
from humidity or hav-
ing water spilled on it. Remove the moist media and replace it
with new, dry media.
The media feed roller
or fuser unit is defec-
tive. Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media. See “Print Media” on page 5-2.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
The date and
time is not
correctly
maintained
on the
printer. The backup battery
has reached the end
of its service life. Contact Technical Support.
Symptom Cause Solution