Atlantis Land A05-17BM-L04 - Manual (Page 31)

Important information for the correct recycle/treatment procedures of this
equipment
The crossed-out wheeled bin symbol printed on the unit label or unit packaging
indicates that this equipment must not be disposed of as unsorted municipal waste but
it should be collected separately.
The waste of electric and electronic equipment
must be treated separately, in order to ensure
that hazardous materials contained inside the
equipment are not buried thereby providing
potential future problems for the environment
and human health. Moreover, it will be
possible to reuse and recycle some parts of
the waste of electric and electronic equipment,
contributing to reduce the quantities of waste
to be disposed of and the depletion of natural
resources.
As user of this equipment, you are responsible to return this waste of electronic
equipment to an authorised collection facility set up by your Municipality. More
detailed information on your nearest collection centre can be obtained from your
Municipality or from other competent local entities.
If you are replacing the old equipment with a new equivalent product, the distributor
must take-back the old equipment free of charge on a one-to one basis as long as the
equipment is of equivalent type and fulfilled the same functions as the supplied
equipment.
Your rôle in participating to the separate collection of waste of electric and electronic
equipment is essential to ensure that environmental protection and human health
objectives connected to a responsible treatment and recycling activities are achieved.
PS.: The above mentioned information are reported herewith in compliance with
Directive 2002/96/CE, which requires a separate collection system and specific
treatment and disposal procedures for the waste of electric and electronic equipments
(WEEE). For further and more detailed information, we invite you to visit our website at
www.atlantis-land.com