Using network connections – Actiontec electronic RI408 User Manual
Page 28
25
Using Network
Connections
The Broadband Router supports various local area network (
LAN
) and wide area
network (
WAN
, or Internet) connections via Ethernet. Network connections is used to
configure the various parameters of the Router’s network and Internet connections,
and create new connections.
M
Caution: The settings covered in this chapter should be config-
ured by experienced network technicians only.
To access the Router’s network connections, in the “My Network” screen,
click Network Connections from the menu on the left side. The “Network
Connections” screen appears.
Click Advanced to expand the screen and display all connection entries.
To select a connection, click on its name. The rest of this chapter describes the dif-
ferent network connections available on the Router, as well as the connection types
that can be created.
4