Konica Minolta bizhub PRESS C7000 User Manual
Page 28
Performing off-the-glass calibration from the Creo
Color Server
Requirements:
●
Make sure that the Calibration is done off-the-glass option is
selected in the Preferences window.
●
Print at least 25 copies of any file to warm up the printer.
Calibrate both the printer and scanner at the same time. If you
place only the print chart on the platen, the printer is calibrated. If
you place only the scanner chart on the platen, the scanner is
calibrated.
1. From the Tools menu, select Calibration.
2. In the Tray list, select the desired tray. The default tray is Tray
1.
3. In the Media Type list, select the desired media type—for
example, Gloss Coated for Laser.You can print the
calibration chart on any paper size that is equal to or larger
than A4 or Letter.
4. In the Screening list, select the screening method.
5. In the Number of copies box, enter the number of copies you
want to print.
Note: It is recommended that you print at least 25 copies of the
calibration chart, and then use one of the last copies printed.
6. (Optional) Select the Engine Calibration check box to
perform an internal printer calibration in addition to the color
calibration.
If you select the Engine Calibration check box, the internal
printer calibration will be performed first, and then the color
calibration will start.
18
Chapter 3—Calibration