Konica Minolta bizhub PRO C65hc User Manual
Page 20
Advertising
2
Stream Punch
16
bizhub PRO C65hc Additional Information
2.4.2
If Burrs Remain in Punch Holes Using Stream Punch GP-
501
If you find burrs remaining in punch holes when using the Stream Punch GP-
501, lubrication is required for the die set currently used.
Lubricate it at the position illustrated below.
2
Reminder
Never use the oil on the general market. For the oil to be used in this pro-
cedure, please contact your service representative.
If burrs still remain in punch holes after the lubrication, apply grease to the
positions illustrated below.
Advertising
This manual is related to the following products: