Konica Minolta bizhub 36 - Manual (Page 187)

bizhub 42/36 14-9
14.2 Glossary 14
Scan Size A function to specify the scanning size of a document to transmit it. If the
width of the paper in the recipient's fax machine is smaller than that of the
transmitted document, the document is usually reduced for printing. If you do
not want to reduce the document size, specify the same document size as
that of the paper in the recipient's fax machine, so that you can send the doc-
ument with its original size.
Screen font A type of fonts used for displaying characters and symbols on a CRT or other
monitor.
Sender Fax No. An identification code used for the mutual recognition for fax transmission.
Usually the fax number is registered for the fax ID.
Sender Name The name of a sender. On the receiver's side, the name is printed as a part
of the sender's information at the edge of the transmitted document.
Sending Sending indicates making a call. For fax, sending indicates sending docu-
ments or dialing for pollings.
Shared printer A printer connected to a server on the network and configured to be used by
multiple computers.
Sharpness A function to enhance the edge of characters before sending the document.
SLP The acronym for Service Location Protocol. This is a protocol that provides
capabilities such as finding services or automatic client configuration on the
TCP/IP network.
SMB The acronym for Server Message Block. This is a protocol for sharing files
and printers mainly over the Windows network.
SMTP The acronym for Simple Mail Transfer Protocol. It is a protocol used to trans-
mit or transfer E-mail messages.
SNMP The acronym for Simple Network Management Protocol. This is a manage-
ment protocol in the TCP/IP network environments.
Spool The acronym for Simultaneous Peripheral Operation On-Line. Data to be out-
put to a printer is not sent directly to the printer, but is temporarily stored in
another location. The stored data is then sent collectively to the printer.
Sub-scanning direction The vertical direction for scanning documents.
Subnet mask A value used to divide a TCP/IP network into small networks (subnetworks).
This is used to identify how many higher-order bits of an IP address are used
for the network address.
Super G3 (SG3) A G3 communication mode complying with ITU-T V.34. Compared with usual
G3 communication, it allows the higher rate transmission (up to 33,600bps).
TCP/IP The acronym for Transmission Control Protocol/Internet Protocol. It is a de
facto standard protocol widely used for the Internet. An IP address is used to
identify each network device.
Timer TX A function of transmitting a fax at the specified time. It is used to save cost
by transmitting faxes late evening or early morning when discount telephone
service is available.
Transmission reservation A function of programming the next transmission during transmission or
printing.
Transmission source
record The transmission time, name, telephone number, page number, and other in-
formation on the sender's side printed at the edge of the document on the
receiver's side.
Transmission time The time needed to send a fax. The higher the resolution or larger the paper,
the longer the transmission takes.
TrueType A type of outline font developed by Apple and Microsoft, and currently used
as a standard font type for Macintosh and Windows. This type of font can be
used both for display and printing.
Uninstallation To delete software installed on a computer
USB The acronym for Universal Serial Bus. This is a general-purpose interface de-
fined for connecting a mouse, printer, and other devices with a computer.
Term Description