Document Outline

• Contents
• Introduction
  • Energy Star®
    • What is an ENERGY STAR® Product?
  • Trademarks and registered trademarks
  • Contents
  • About this manual
    • Structure of the manual
    • Notations
    • Images that are used
    • Function precautions
    • Functions that cannot be used
  • Explanation of manual conventions
• 1 Features
  • 1.1 IP address faxing
  • 1.2 Scan to PC
  • 1.3 IP Scanner
  • 1.4 IP Relay
  • 1.5 PageScope Web Connection
• 2 IP address faxing
  • 2.1 Specifying a recipient with a one-touch dial button
    • Selecting a one-touch dial button
    • Specifying a recipient by touching a one-touch dial button
    • Entering the number of the one-touch dial button
    • Searching for a one-touch recipient
  • 2.2 Entering an address
    • To enter an address
  • 2.3 Specifying the scanning quality and zoom ratio
    • Quality
    • To select an Quality setting
    • Density
    • To select a Density setting
    • Original Size Setting
  • 2.4 Specifying additional functions
    • Specifying the transmission source information
    • Specifying the transmission report printing condition
    • Specifying 2in1 transmission
    • Specifying double-sided transmission settings
    • Specifying priority transmission
    • Specifying timer transmission settings
    • Specifying the stamp setting
  • 2.5 If the transmission could not be completed
    • Viewing the transmission report
    • Resending
  • 2.6 Receiving an IP address fax
  • 2.7 Adding a recipient
    • To program a one-touch dial button
    • Changing/deleting a one-touch dial button
    • Copying a one-touch dial button
    • Registering/editing/deleting the secondary recipient
    • Naming an index
    • To name an index
    • Registering a mail program
    • To register a mail program
    • Changing/deleting a mail program
• 3 Scan to PC operations
  • 3.1 Before saving
    • Installing IP Scanner on the computer
    • Checking the network settings
  • 3.2 Specifying a destination with a one-touch dial button
    • Selecting a one-touch dial button
    • Specifying a recipient by touching a one-touch dial button
    • Entering the number of the one-touch dial button
    • Searching for a one-touch recipient
  • 3.3 Entering an address
    • To enter an address
  • 3.4 Specifying the scanning quality and zoom ratio
    • Quality
    • To select an Quality setting
    • Density
    • To select a Density setting
    • Original Size Setting
  • 3.5 Specifying additional functions
    • Specifying the transmission report printing condition
    • Specifying 2in1 transmission
    • Specifying double-sided transmission settings
    • Specifying priority transmission
    • Specifying timer transmission settings
    • Specifying the stamp setting
    • Specifying the file name
  • 3.6 If the data could not be saved
    • Viewing the transmission report
    • Resending
  • 3.7 Registering a destination
    • Programming a one-touch dial button
    • To program a one-touch dial button
    • Changing/deleting a one-touch dial button
    • Copying a one-touch dial button
    • Registering/editing/deleting the secondary recipient
• 4 IP Scanner
  • 4.1 Before using IP Scanner
    • IP Scanner and ImageReceiver
    • Using a dial-up router
    • Using a modem or terminal adapter
    • Using Windows XP Service Pack 2/Windows Vista
    • Allowing ImageReceiver to be used
    • ImageReceiver port conflicts
    • SSL transmissions
    • Installing certificates
  • 4.2 Installing/uninstalling utilities
    • ImageReceiver installation methods
    • Installing utilities
    • Uninstalling utilities (for Windows 2000/XP/Server 2003/Vista/ Server 2008)
  • 4.3 IP Scanner operations
    • Main window
    • Available commands
    • Scanner Settings dialog box
    • Sort Settings dialog box (Scanner tab)
    • Sort Settings dialog box (RX Document tab)
    • Sort Settings dialog box (TX Document tab)
    • Divided Settings dialog box
    • Receive Notify Settings dialog box
    • ViewWindow
    • Printer Setting dialog box
    • Print Property dialog box
  • 4.4 ImageReceiver operations
    • ImageReceiver icon
    • ImageReceiver commands
    • Automatic Print Settings dialog box
    • Folder and Printer Settings dialog box
  • 4.5 Registering scan buttons and scan operations
    • General operation
    • Starting IP Scanner
    • Registering a scan button
    • Scanning a document using the registered settings
    • Viewing the scanned image
    • Specifying automatic printing with IP Scanner
    • Automatically printing with IP Scanner
    • Specifying automatic printing with ImageReceiver
    • Automatically printing using a one-touch dial button
    • Exiting IP Scanner
  • 4.6 Other operations
    • Forwarding a received document to IP Scanner
    • Forwarding to IP Scanner
• 5 IP Relay operations
  • 5.1 Before transmitting
    • Setting “Gateway TX” to “Restrict”
    • Specifying settings for relay stations
  • 5.2 Specifying a recipient with a one-touch dial button
    • Selecting a one-touch dial button
    • Specifying a recipient by touching a one-touch dial button
    • Entering the number of the one-touch dial button
    • Searching for a one-touch recipient
    • Specifying chain dialing
  • 5.3 Entering a fax number
    • To enter a fax number
  • 5.4 Specifying the scanning quality and zoom ratio
    • Quality
    • To select an Quality setting
    • Density
    • To select a Density setting
    • Original Size Setting
  • 5.5 Specifying additional functions
    • Specifying the transmission report printing condition
    • Specifying 2in1 transmission
    • Specifying double-sided transmission settings
    • Specifying the priority transmission setting
    • Specifying timer transmission settings
    • Specifying the stamp setting
  • 5.6 If the transmission could not be completed
    • Viewing the transmission report
    • Resending
  • 5.7 Registering a recipient
    • Programming a one-touch dial button
    • To program a one-touch dial button
    • Changing/deleting a one-touch dial button
    • Copying a one-touch dial button
    • Registering/editing/deleting the secondary recipient
• 6 Specifying settings using PageScope Web Connection
  • 6.1 Settings that can be specified using PageScope Web Connection
    • Scan tab (User mode)
    • Network tab (Administrator mode)
  • 6.2 Using PageScope Web Connection
    • System requirements
    • Accessing PageScope Web Connection
    • If user authentication settings have been applied
    • If account track settings have been applied
    • Structure of pages
    • Logging on to Administrator mode
    • Web browser cache
    • With Internet Explorer
    • With Netscape
  • 6.3 One-Touch Key Registration (User mode)
    • Naming an index
    • Registering a one-touch dial recipient
    • Registering a secondary recipient
    • To regist a secondary recipient
    • Changing the settings for a one-touch dial recipient
    • Deleting a one-touch dial recipient
  • 6.4 IP Relay Settings (Administrator mode)
    • Selecting the IP relay station to be used
    • To select a relay station
    • Registering an IP relay station
    • To register an IP relay station
• 7 Specifying management settings
  • 7.1 Available parameters
    • Parameters that can be specified from the Administrator Management screen
    • List of required network settings
  • 7.2 IP Relay Settings
    • Registering an IP relay station
    • To register an IP relay station
    • Selecting an IP relay station
    • Specifying the relay result port
  • 7.3 Specifying software switch settings (machine functions)
    • Software SW settings
    • To specify a software switch setting
    • Specifying settings to limit dialing and broadcast transmissions (mode 018)
    • Specifying settings for the image in the results report (Mode 023)
    • Specifying settings for checked receiver transmissions (mode 200)
    • Specifying transmission source information for IP address faxing (mode 351)
    • Specifying whether transmission source information is added when performing an IP relay operation or forwarding received documents (mode 352)
    • Specifying the default address input screen (mode 366)
    • Specifying settings for the information indicated in the report for IP relay transmissions (mode 368)
    • Specifies the coding method for IP relay transmissions (mode 381)
    • Specifying settings concerning the transmission results for IP relay transmissions (mode 382)
    • Specifying settings to limit the use of communication modes-1 (mode 475)
    • Specifying settings to limit the use of communication modes-2 (mode 476)
    • Specifying settings to limit the use of communication modes-3/Specifying restrictions for registering fax addresses and printing reports and specifying how one-touch dial recipients are displayed (mode 477)
    • Specifying the deleting method for [Del.] in input screens (mode 478)
    • Specifying settings for limiting user authentication to only Scan functions (mode 479)
• 8 Troubleshooting
  • 8.1 When a certain screen appears
    • When a certain screen appears
  • 8.2 Error codes
    • Scan to PC operations
    • IP Scanner operations
    • IP relay operations
  • 8.3 Troubleshooting
    • IP address faxing
    • Scan to PC operations
    • IP Scanner operations
    • IP relay operations and others
• 9 Appendix
  • 9.1 Specifications
    • IP address faxing specifications
    • Scan to PC specifications
    • IP Scanner specifications
    • IP relay specifications
  • 9.2 Entering text
    • To type text
    • List of available characters
  • 9.3 Glossary
  • 9.4 Index
    • Numerics
    • A to O
    • P to V