Konica Minolta NC-503 - Manual (Page 59)

4 Network settings
4-8 NC-503
2
Press the [,] or [+] key until “ADMIN. MANAGEMENT” is selected, and
then press the [OK] key.
3
Type in the administrator access code, and then press the [OK] key.
– For the administrator access code, consult with the network admin-
istrator.
– The manufacturer’s default setting is “000000”.
– If the number was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4
Press the [,] or [+] key until “NETWORK SETTING” is selected, and
then press the [OK] key.