Konica Minolta Magicolor 2450 - Manual (Page 189)

Configuring the Printer 173
SNMP
The Network/Ethernet/SNMP window provides the following parameters for
configuration:
Item Description
Enable SNMP If selected, enables the parameter settings for
SNMP.
Default: [Checked]
SNMP
NMS1 Community Sets the IP community of the printer.
Range: Up to 32 characters
Default: public
Access Identifies Read or Write access.
SNMP
NMS2 Community Sets the IP community of the printer.
Range: Up to 32 characters
Default: private
Access Identifies Read or Write access.