Ethernet menu 95 – Konica Minolta Magicolor 2450 User Manual
Page 111
Ethernet Menu
95
Default Router
Subnet Mask
Enable HTTP
Enable Auto IP
Purpose
Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default
000.000.000.000
Purpose
Sets the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default
000.000.000.000
Purpose
Specify whether or not HTTP is used.
Range
YES
NO
Default
YES
Purpose
Select whether or not the IP address is automatically
acquired when DHCP/BOOTP and PING, ARP are not
functioning or when there is no response.
Range
YES
NO
Default
NO