Konica Minolta KIP 600 Scanner - Manual (Page 19)

Part 1 Basic Functions 1-13
Chapter 2 Basic Operation
2. 1 Turning on KIP 600A
1. Plug the power cord to a dedicated outlet.
2. Press “I” side of the Power Switch (1) on the rear.
WARNING
• Do not handle the power plug with a wet hand. It may result in receiving an electrical
shock.
• Be sure to ground the machine.
• Use a dedicated outlet for KIP 600A. Many loads on a single outlet may cause
overheating and result in a fire.
• The outlet must satisfy the following conditions;
100-120VAC/200-240VAC, 50/60Hz, 1A or higher
1 Press this side