2 [netware, Netware] -12 – Konica Minolta bizhub 42 User Manual
Page 37
Advertising
bizhub 42/36
4-12
4.5
[Ethernet]
4
4.5.2
[Netware]
Specify Netware setting.
If you change this setting and exit the Ethernet menu, the machine is rebooted.
%
Press the Utility/Counter key ö [Admin Settings] ö [Ethernet] ö [Netware].
[IPP]
[Enable]
[RAW Port]
[Enable]: [Yes]
[Bidirectional]: [OFF]
[SLP]
[Enable]
[SMTP]
[Enable]
[SNMP]
[Enable]
[WSD Print]
[Enable]
[IPSec]
[Disable]
[IP Address Filter]
[Permit Access]: [Disable]
[Deny Access]: [Disable]
[IPv6]
[Enable]: [ON]
[Auto Setting]: [Enable]
Factory default
Settings
[Enable]
Select whether or not to enable NetWare.
[Disable]
Factory default
[Netware]
[Disable]
Advertising
This manual is related to the following products: