To load paper into the manual bypass tray – Konica Minolta CF2001 User Manual
Page 8
6
CF1501/2001
To load paper into the manual bypass tray
Paper can be fed manually through the manual bypass tray if you wish to copy onto
paper that is not loaded into a drawer, or if you wish to copy onto special paper, such
as overhead transparencies, postcards, or thick paper 1 or 2.
Open the manual bypass tray.
Adjust the paper guides to fit the
size of paper to be loaded, and
then lightly insert the paper as far
as possible.
When paper is loaded into the
manual bypass tray, a screen
that allows you to select the
paper size appears.
(Refer to “To copy onto manually
fed paper” on page 11.)
Note
Copies will be made on the surface of the
paper facing down when it is loaded into
the manual bypass tray.
C4004O512AA
1
C4004O513AA
2
NewT.book Page 6 Friday, January 12, 2001 1:19 PM