Replacing the transfer belt unit tf-p05, Replacing the transfer belt unit tf-p05 -24 – Konica Minolta bizhub C35P User Manual
Page 177
Advertising
Replacing Consumables
7-24
Replacing the Transfer Belt Unit TF-P05
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE
appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the trans-
fer belt unit should be replaced immediately.
1
Turn off the printer and discon-
nect the power cord and inter-
face cover.
2
Open the printer’s front cover.
Advertising