Konica Minolta bizhub C3850 User Manual
Page 93
[Scan Functions]
9-6
9.3
TWAIN scanning
9
% [Advanced Mode] setting items
6
Click [Scan].
The desired image is imported to the application software.
Settings
Description
[Paper source]
Select whether or not to load the original on the original glass (flatbed) or ADF.
When using the ADF to scan the original, select 1-sided or 2-sided.
[Original Size]
Specify the size of the original.
[Scan Type]
Specify the type of image to be scanned. Select the desired one from full color,
gray, or black and white.
[Resolution]
Select the resolution at which to scan the original.
[Scale]
Specify the enlargement or reduction ratio.
This setting is not supported when [Resolution] is 1200 dpi e 1200 dpi or high-
er.
[Scanning Mode]
Select the scan mode.
•
[Auto]: Automatically adjusts a light image to a dark one and a dark image
to a light one for a preview image.
•
[Manual]: Manually adjusts settings using the Brightness/Contrast, Filter,
Curve, Level, Color Balance, Hue/Saturation tab.
[Image size]
Displays the data size of the image to be scanned.
[Rotation]
Specify the orientation of the image to be scanned.
Selecting the [Rotate back side] check box rotates the back side 180 degrees
to scan the original (this setting is available when [Paper source] is set to [ADF
(2-sided)]).
[Auto Deskew]
Specify whether or not to automatically adjust the inclination of the original.
Auto Crop icon
Click this icon to automatically detect the position of the original displayed in
the preview area and draw a crop frame that fits the original.
Zoom Prescan icon
Click this icon to rescan the selected range in the preview area and display it
in the entire preview area.
Mirror Image icon
Click this icon to reverse the left and right sides of the preview image.
Gradation Reverse icon
Click this icon to reverse the color of the preview image.
Clear icon
Clears the preview image.
[Before] / [After] (RGB)
If you move the cursor on the preview image, the image at the cursor position
is displayed with the tone before and after the adjustment.
[Width] / [Height]
Displays the width and height of the selected range in the preview area.
[Save]
Click this button to save the current setting as a configuration file (dat file).
[Load]
Click this button to scan the saved configuration file (dat file).
[Default]
Click this button to restore all settings to the defaults.