7 trouble in use of finisher fs-p03, Trouble in use of finisher fs-p03 -15 – Konica Minolta bizhub C3850 User Manual
Page 73
Advertising
[Maintenance/Troubleshooting]
4-15
4.7
Trouble in use of Finisher FS-P03
4
4.7
Trouble in use of Finisher FS-P03
Description of problem
Check points
Remedy
The Finisher does not
function.
-
Turn the power of this machine off and on to re-
set the Finisher.
Have you loaded paper
on which an image with-
out margins has been
printed?
Paper on which an image without margins has
been printed will not be stapled because the sen-
sor cannot detect it. Do not load paper on which
an image without margins is printed.
Advertising
This manual is related to the following products: