Konica Minolta ScanDiva User Manual
Page 36
Advertising
ScanDIVA User’s Guide
3-6
10
When the “InstallShield Wizard Complete” screen appears, click the “Finish”
button and remove the CD-ROM from the Personal Computer.
11
Turn the Power Switch of the Scanner ON.
12
“Installing device driver software” appears.
13
The installation of the Driver is completed.
After the installation of the Driver is completed, start the Scanner setup.
NOTE !
In order to read the screen properly, be sure to set up the Scanner.
For the procedure for setting up the Scanner, refer to Chapter 3, “2
Setup of the Scanner”.
Advertising