Konica Minolta bizhub 36 - Manual (Page 2)

Short Guide 2/3
A4 black & white
multifunctional
Number of
copies
Scroll up / down Check the specified
copy settings
Return to Home
screen
Basic functions
Initial Copy mode screens
Copy mode
operations
Select size and type of the
paper to be printed.
Duplex/Combine
settings
Select zoom ratio
Specify size of the
original Separate Scan on/off
Specify a binding margin
Select the document
type (text or image)
Adjust the image quality
Copy back and front of an ID card
on a single page Adjust the copy density
Proof copy on/off Specify finishing settings
Zoom
1. Position the original(s).
2. Touch ZOOM in the Copy screen (001/003).
3. Make the desired settings.
4. Touch OK.
5. Press the START key.
Automatically
reduce/enlarge original
size to paper size
Change zoom
manually
Change preset zoom
ratio or programmed
zoom ratio
Keep original size
Enter a custom zoom ratio
Slightly smaller than
original size
Preset Zoom ratios
Image Quality
1. Position the original(s).
2. Touch IMAGE QUALITY in the Copy screen (003/003).
3. Make the desired settings.
4. Touch CLOSE.
5. Press the START key.
Adjust the image
contrast
Adjust the background
density
Adjust the sharpness of
text and image outlines
Duplex/Combine
1. Position the original(s).
2. Touch DUPLEX/COMBINE in the Copy screen (001/003).
3. Make the desired settings.
4. Touch CLOSE.
5. Press the START key.
Copy 2 or 4 document
pages onto one page
Select 1-sided or
2-sided copying
Select corner or two point stapling
(only with finisher)
Select orientation of the
original loaded into ADF or
placed on the original glass
Finishing
1. Position the original(s).
2. Touch FINISHING in the Copy screen (002/003).
3. Make the desired settings.
4. Touch CLOSE.
5. Press the START key.
Scroll up / down
Specify binding positions
for the original and the
copies
Offset output yes/no
(only with finisher)
Specify Sort/Group
settings