Konica Minolta PageScope Data Administrator User Manual
Page 59
How to Use the PageScope Data Administrator
3
PageScope Data Administrator
3-50
6
Set the date and time, and click [Change settings].
–
Set the time.
Select this to set the date and time of the device.
Set to the date and time of the PC:
Select this to set the date and time to that of the PC upon which
Data Administrator is being used.
NTP Server setting:
Selected when synchronized with the NTP server. Enter the NTP
server address and the port No.
Manual Setting:
Select this to manually set the date and time.
Year/Month/Day: Select the date.
Time: Input the time (hours/minutes).
Set up the time zone: Select this to set the time zone.
Select the time difference between GMT (Greenwich Mean Time)
and your place.
–
Set up daylight saving time:
Select this to change the daylight saving time setting of the device.
Enable:
Select this to enable the daylight saving time. Input the time (min-
utes).
Invalidity:
Select this to disable the daylight saving time.
7
Click [Finished].
The date and time are changed.