Konica Minolta eCopy - Manual (Page 15)

eCopy™ Connector for Livelink ECM™ Administrator’s Guide | 11
TABLE 1. Configure settings
Field Description
Database The Livelink ECM database name.
Livelink
Server The Livelink EMC Enterprise Server name. The server must either be on the same local area
network (LAN) as the Services Manager or must be connected to the Services Manager by a
Virtual Public Network (VPN).
Port The port used by the Livelink server. The default is 2099.
Username
and
Password When you create libraries in Livelink ECM, you set up credentials for users who have access to
the information stored in each library. The user name and password that you enter here must
provide access to the library referenced by this destination. The user name and password are
also used to access the list of names used for the type ahead function at the device.
If you change this information on the Livelink server, you must also change it for this
connector profile.
Display only
Required
attributes Limits the attributes displayed at the device to those designated as Required in the Livelink
ECM database.
Username
Type Ahead There are three options for this function:
■ Enabled: The user at the device can enter a few letters. The connector searches the Livelink
ECM database and the corresponding names appear in a list.
■ Disabled: The function is not available at the device.
■ Remember: Each time a user enters a new name the connector stores it in a cache. When
the user enters the first letters of a name, the connector searches the cache and not the
Livelink server. This is helpful if searches of the Livelink ECM Enterprise Server are slow.