Konica Minolta bizhub C35 - Manual (Page 51)

[Accessibility] 3-4
1
Press the [Utility/Counter] key.
2
Press [Accessibility].
"
All factory default values are shown in bold.
Item Description
[Key Repeat /Interval] The length of time until the value begins to change
after a button is held down and the length of time for
the value to change can be specified.
[Time to Start] Settings
0.1
to 3.0 seconds (Default:0.8)
Specify the length of time until a value begins to
change after a button is held down.
[Key Interval] Settings
0.1
to 3.0 seconds (Default:0.3)
Specify the length of time for the value to change.
[Sound Settings] Settings can be specified for the various sounds pro-
duced with key operations.
[Set all] Settings Enable: [ON] / [OFF]
Volume: [Low] / [Medium] / [High]
To specify that sounds be produced, press [Enable],
and then press [ON]. To adjust the volume, press
[Volume], and then press [Low], [Medium] or [High].
To specify that sounds not be produced, press
[Enable], and then press [OFF].
[Operation Confirma-
tion] Select if confirmation sounds are to be produced with
key operations.
[Input Confirmation
Sound] Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when keys are
pressed to enter data.
[Invalid Input Sound] Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when keys are
pressed to enter invalid data.
[Basic Sound] Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when the
default setting is selected while scrolling through the
settings.