Tx/rx setting – Konica Minolta bizhub 500 User Manual
Page 233
Advertising
10
Utility Mode
10-52
Network Fax
Utility Mode
Chapter 10
TX/RX Setting
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2
Press [Fax Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
3
Press [TX/RX Setting].
Advertising
This manual is related to the following products: