Konica Minolta KIP Color 80 - Manual (Page 15)

1-10
Name of part Function
Cutter Handle Can manually cut the mis-fed media rotating the Cutter Handle.
Fuser Handle Can remove the mos-fed media from the Fuser Region safely.
Dust Tray Collects the paper dust generated inside of the machine. Dust can
be disposed by pulling out the Dust Tray.
Counter A Counts the linear meter (linear feet - NA) of total prints.
Counter B Counts the square meter (square feet - NA) of total prints.
Dehumidify Heater
Switch Can turn on the Dehumidify Heater by pressing the “H” side, and
turn it off by pressing the “L” side
Fuser Handle Can eject mis-fed media from the Fuser Unit by rotating the Fuser
Handle when the media is mis-fed in the Fuser Unit.
Toner Cartridge 4 Toner Cartridges (cyan, magenta, yellow and black)
Waste Toner Door Can access the Waste Toner Box by opening the Waste Toner
Door.
Waste Toner Box Collects the wasted toner.