Konica Minolta KIP Color 80 - Manual (Page 24)

1-19
2. 3 Replacing the Roll Media
The Roll Empty Indicator lights red when the used roll media is emptied during printing.
Install a new roll media as instructed in below.
Roll Empty Indicator
1 2 3 4
Paper Deck
K
C
M
Y
MF
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
Wire-Clean
Menu Enter Online
Copy Density
Select Cut
(1) Even if the KIP Color 80 is printing, a Roll Deck may be able to open without
interrupting the printing operation for replacing the roll media.
Whether a certain Roll Deck can be opened or not is shown by the corresponding”In Use”
indicator.
A Roll Deck can be opened for replacing the roll media even during printing if the
concerning In Use Indicator is not lighting.
Do not open the Roll Deck when its In Use Indicator is lighting.
Refer to the [1.3.6.3 “In Use” Indicator] on page 1-138 for further detail.
(2) The Roll Empty Indicator informs just “any” roll media is empty. Check the Roll Level
Indicator on the Media & Toner Information Panel to know which of 4 roll media is empty.
Media Size Indicator, Media Type Indicator and all of 4 LED of the Roll Level Indicator go
off if the concerning roll media is empty.
Roll Level
1 Plain Paper
Vellum/Tracing
Film
Gloss
In Use
All the indicators go off when empty
(3) A new roll paper can be installed by the common method to all of 4 Roll Decks.
Reference