Konica Minolta bizhub C3350 User Manual
Page 47
Advertising
[Introduction]
6-11
6.4
Loading paper into Tray 2/3
6
4
Load paper into the tray with the print side facing up.
% For details on the available paper sizes, refer to page 6-2.
NOTICE
Do not load the sheets up to the point where the top of the stack is higher than the
,
mark.
If paper is curled, flatten it before loading.
5
Align the paper guide to the paper size.
6
Close Tray 2/3.
7
If necessary, change the paper type on the Control Panel.
% To configure settings: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting] - [Paper Tray] -
[Tray 2] or [Tray 3]
% The paper size is automatically set.
Advertising
This manual is related to the following products: