Konica Minolta magicolor 1690MF - Manual (Page 125)

Specify the Scan Settings 1-102
„ Scale
Shows the width and height of the area to be scanned.
"
If the resolution is set at 1200 × 1200 dpi or higher, a setting larger
than 100% cannot be specified.
„ Scanning Mode
Select Auto or Manual. When Manual is selected, settings can be speci-
fied for Brightness/Contrast, Filter, Curves, Levels, Color Balance
and Hue/Saturation.
"
The parameters that can be set differ depending on the scanning
mode that is selected.
"
If Auto is selected as the scanning mode, scanning from the original
glass is performed after a prescan is performed so that a preview
image can be checked.
„ Image size
Shows the data size of the scan image.
„ Rotation
The TWAIN driver support 4 kinds of rotation type: None, Right 90, Left
90, 180.
„ Close
Click to close the TWAIN driver window.
„ Prescan
Displays a preview in the preview window.
„ Scan
Click to begin scanning.
„ AutoCrop
Selects an area of the scanned image.
„ Zoom
Zooms in on the scanned image.
„ Mirror
Displays a mirror image of the preview image.
„ Tone Reversal
Reverses the colors of the preview image.
„ Clear
Erases the preview.
„ Before/After (RGB)
Move the pointer in the preview window to display the color tones at the
pointer's position before and after adjustments.