Konica Minolta Magicolor 5440 DL - Manual (Page 139)

Status, Error, and Service Messages 129
TRANSFER END The transfer belt unit
has reached the end
of its life. Replace the transfer belt
unit and reset the
counter in the
ENGINE/
SERVICE/RESET
COUNTER TRANS-
FER UNIT
menu.
TRANSFER LOW The transfer belt unit
is near the end of its
life. Prepare a new transfer
belt unit.
TRANS.ROLLER END The transfer roller has
reached the end of its
life. Replace the transfer
roller and reset the
counter in the
ENGINE/
SERVICE/RESET
COUNTER TRANS-
FER ROLLER
menu.
TRANS.ROLLER LOW The transfer roller is
near the end of its life. Prepare a new transfer
roller.
TRAY X EMPTY Tray X (Tray 1, 2, or
3) was specified with
the printer driver for
printing, but Tray X is
empty. Load media into the
specified tray.
UNSUPPORTED DIMM An unsupported
DIMM is installed. Check the DIMM specifi-
cations and install a sup-
ported DIMM.
WASTE:NEAR FULL The waste toner bot-
tle is nearly full. Prepare a new waste
toner bottle.
This message... means... do this...